QUICK CHANGE CHUCK JAWS - BAR OR THROUGH HOLE WORK



When the Lock Screw is tightened into the lock screw detent of the insert, three directional insert clamping occurs. Clamping force is up against the end of the J-LOC master jaw, back against the Lock Pin and securely in contact with the side of the tongue. This creates a no clearance situation to insure rigidity and repeatability.

                CHANGE JAW INSERTS IN 10 SECONDS OR LESS
              WITH .0005" T.I.R. REPEATABLE ACCURACY

                   CLICK HERE FOR C-STYLE DIMENSIONS, INSERT CHOICES,
                 AND MOUTING SPECIFICATIONS


RELEASE INSERT (3-4 TURNS OF WRENCH)	REMOVE INSERT	REPLACE WITH NEW OR PREBORED INSERT	TIGHTEN TO SECURE THE INSERT
CLICK HERE FOR AN ANIMATED DEMONSTRATION CLICK HERE FOR VIDEO DEMONSTRATION OF INSERT CHANGE CLICK HERE FOR VIDEO OF INSERT CHANGE FROM LARGE PART TO A COLLET CHUCK

INSERTS AND JAW EXTENSIONS
AVAILABLE FOR C-STYLE MASTER JAW

ALL OF THESE INSERT STYLES FIT ONE MASTER JAW

JAW EXTENSIONS
INCREASE RANGE COVERD BY STANDARD INSERTS
WITH J-LOC JAW EXTENSIONS

CHUCK ONE - STANDARD INSERTS

CHUCK TWO - 1.5 EXTENSIONS AND STANDARD INSERTS

CHUCK THREE - 3" EXTENSIONS AND STANDARD INSERTS

SPECIFICATIONS

C-STYLE USAGE EXAMPLES

SYSTEM ADVANTAGES:ECONOMICAL EASY TO BORE INSERTS

SAVES SET UP TIME
INSERTS ARE REUSABLE WITH REPEATABLE ACCURACY OF .0005" T.I.R.
SIMPLE PATENTED USER FRIENDLY DESIGN
BOLT ON LIKE ANY OTHER REPLACEMENT JAW
VIRTUALLY ELIMINATES REBORING FOR REPEAT JOBS
CHUCKS OF EQUAL SIZE USE SAME INSERTS REGARDLESS OF JAW MOUNT CONFIGURATION

JAW FEATURES:

         10 SECOND OR LESS INSERT CHANGE OUT
         BOLT ON LIKE STANDARD SOFT JAWS
         INSERTS ARE REVERSIBLE FOR GREATER ECONOMY
         AS STRONG AS STANDARD SOFT JAWS

INSERT FEATURES:

SOFT, EASY TO MACHINE
REUSABLE AND REPEAT TO .0005" T.I.R.
MAY BUILD FIXTURES ON INSERTS AND CHANGE OUT FIXTURES
AVAILABLE IN MILD STEEL
REVERSIBLE FOR GREATER ECONOMY
HELD SECURELY IN PLACE BY A CONE POINT LOCK SCREW AND SOLID LOCK PIN