CHANGE JAW HOLDING SURFACES IN 10
SECONDS OR LESS
WITH .0005" REPEATABLE ACCURACY
(C STYLE SHOWN IN DEMOS. D STYLE PROCEDURE IS IDENTICAL.
|
 |
 |
|
J-LOC LOCK PIN AND
LOCK SCREW DETAIL |
J-LOC INSERT HOOK AND
LOCK SCREW DETENT DETAIL |
|
 |
|
When the Lock Screw
is tightened into the lock screw detent of the insert, three
directional insert clamping occurs. Clamping force is up against
the end of the J-LOC master jaw, back against the Lock Pin and
securely in contact with the side of the tongue. This creates a no
clearance situation to insure rigidity. |
|
 |
 |
 |
|
RELEASE INSERT
(3-4 TURNS OF WRENCH) |
REMOVE INSERT |
REPLACE WITH NEW
OR PREBORED INSERT |
TIGHTEN TO SECURE
THE INSERT |
CLICK HERE FOR
AN ANIMATED DEMONSTRATION
|
J-LOC D-STYLE
INSERT CHOICES.
ALL THESE INSERT CONFIGURATIONS
FIT THE SAME MASTER JAW |
 |
 |
 |
|
LONG REACH INSERTS FOR SMALL PARTS |
STANDARD INSERTS FOR LARGE PARTS |
PIE INSERTS FOR THIN WALL PARTS |
CHANGE TO ANY OF THE INSERT
CONFIGURATIONS IN 10 SECONDS OR LESS!
.0005" REPEATABLE ACCURACY |
SPECIFICATIONS |
SYSTEM
ADVANTAGES:
- ECONOMICAL
INSERTS
- SAVES SET UP
TIME
- INSERTS ARE
REUSABLE WITH REPEATABLE ACCURACY OF .0005" T.I.R.
- SIMPLE PATENTED
USER FRIENDLY DESIGN
BOLT ON LIKE ANY OTHER REPLACEMENT JAW
VIRTUALLY ELIMINATES REBORING FOR REPEAT
JOBS
CHUCKS OF EQUAL SIZE USE SAME INSERTS
REGARDLESS OF JAW MOUNT CONFIGURATION
JAW FEATURES:
10 SECOND OR LESS JAW
CHANGE OUT
REUSABLE AND REPEAT TO .0005" T.I.R.
BOLT ON LIKE STANDARD SOFT JAWS
INSERTS ARE REVERSIBLE FOR GREATER ECONOMY
INSERT FEATURES:
- SOFT, EASY TO
MACHINE
- MAY BUILD
FIXTURES ON INSERTS AND CHANGE OUT FIXTURES
- AVAILABLE IN
MILD STEEL AND OTHER
MATERIALS
- REVERSIBLE FOR
GREATER ECONOMY
- HELD SECURELY
IN PLACE BY A CONE POINT LOCK SCREW AND SOLID LOCK PIN
|
|
