5CCUTAWY

THE ONLY I. D. COLLET BODY ON THE MARKET WHICH WORKS
ON BOTH PUSH (CONTROLLED LENGTH) AND PULL TYPE COLLET CHUCKS
SIMPLY BY REPLACING AN O. D. COLLET WITH AND I. D. COLLET!

PUSH TYPE COLLET CHUCK

PULL TYPE COLLET CHUCK

J-LOC I. D. COLLET FOR PUSH
TYPE (CONTROLLED LENGTH) COLLET CHUCKS
(PRESSURE PLUG IS PUSHED FORWARD TO ACTIVATE)

J-LOC I. D. COLLET FOR PULL TYPE
COLLET CHUCKS
(COLLET BODY IS PULLED BACK TO ACTIVATE)

THE ONE PIECE COLLET BODY IS THREADED INTO A STATIONARY POSITION IN THE COLLET CHUCK.

THE PRESSURE SEGMENTS EXTEND THROUGH THE COLLET BODY FROM THE EXPANSION PLUG.

WHEN THE PRESSURE SEGMENTS MAKE CONTACT WITH THE COLLET CHUCK ACTUATING SLEEVE, THE SEGMENTS AND EXPANSION PLUG MOVE FORWARD AND FORCE THE SPLIT PORTION OF THE COLLET BODY TO EXPAND MAKING CONTACT WITH THE WORK PART.

THE STATIONARY POSITION OF THE COLLET INSURES LENGTH CONTROL EVEN IF WORK PART I. D. VARIES.

THE WORK PART IS SUPPORTED ALONG THE ENTIRE LENGTH OF THE HOLDING SURFACE, INSURING MAXIMUM RIGIDITY.

THE ONE PIECE COLLET BODY IS THREADED TO THE MACHINE SPINDLE DRAW TUBE

THE PRESSURE SEGMENTS EXTEND THROUGH THE COLLET BODY FROM THE EXPANSION PLUG TO THE STANDARD COLLET SPINDLE ADAPTER.

AS THE DRAWTUBE IS ACTIVATED THE PRESSURE SEGMENTS MAKE CONTACT WITH THE SPINDLE ADAPTER, THE SEGMENTS AND EXPANSION PLUG STOP MOVING AND BECOME STATIONARY.

THE COLLET BODY CONTINUES TO SLIDE BACK, MOVED BY THE DRAWTUBE , AGAINST THE STATIONARY EXPANSION PLUG FORCING THE SPLIT PORTION OF THE COLLET BODY TO EXPAND TO MAKE CONTACT WITH THE WORK PART I . D. .

THE WORK PART IS SUPPORTED ALONG THE ENTIRE LENGTH OF THE HOLDING SURFACE, INSURING MAXIMUM RIGIDITY.

ACTUAL PHOTOGRAPH OF A
J-LOK "PULL TYPE" I. D. COLLET

STRONGEST I.D. COLLET
ON THE MARKET TODAY!

.0005 T.I.R. REPEATABLE ACCURACY

NO TURNING NECESSARY

FOR ANY COLLET CHUCK
LATHES, MILLS, OR GRINDERS!