J-LOC B42 AND B60 EXPANDING MANDREL COLLETS

CLICK HERE FOR B42 DIMENSIONS AND SIZES

CLICK HERE FOR B60 DIMENSIONS AND SIZES

HOW THE J-LOK PUSH TYPE I. D. COLLETS WORKS!

J-LOK I. D. COLLET FOR PUSH
TYPE (CONTROLLED LENGTH) COLLET CHUCKS
(PRESSURE PLUG IS PUSHED FORWARD TO ACTIVATE)

THE PRESSURE SEGMENTS EXTEND THROUGH THE COLLET BODY FROM THE EXPANSION PLUG.

WHEN THE PRESSURE SEGMENTS MAKE CONTACT WITH THE COLLET CHUCK ACTUATING SLEEVE, THE SEGMENTS AND EXPANSION PLUG MOVE FORWARD AND FORCE THE SPLIT PORTION OF THE COLLET BODY TO EXPAND MAKING CONTACT WITH THE WORK PART.

THE STATIONARY POSITION OF THE COLLET INSURES LENGTH CONTROL EVEN IF WORK PART I. D. VARIES.

THE WORK PART IS SUPPORTED ALONG THE ENTIRE LENGTH OF THE HOLDING SURFACE, INSURING MAXIMUM RIGIDITY.

NO MACHINING NECCESSARY!


B42 COLLET CHUCK	J-LOC B42 I.D. COLLET	B42 FRONT RING	WORK PART

B42 PUSH TYPE COLLET CHUCK	B42 CHUCK WITH J-LOC COLLET INSERTED	COLLET CHUCK, J-LOC COLLET AND FRONT RING INSTALLED	COLLET CHUCK, J-LOC COLLET, FRONT RING AND WORPART INSERTED

PATENTED PUSH TYPE I.D. COLLET WITH "EXACT LENGTH CONTROL" FOR CRAWFORD AND BROWN AND SHARP PUSH TYPE COLLETS AVAILABLE IN B42 AND B60 SIZE COLLETS THE LENGTH DOES NOT VARY IF WORKPART I.D. SIZE VARIES! NO SPECIAL ADAPTERS AND FIXTURES!

PATENTED PUSH TYPE I.D. COLLET WITH "EXACT LENGTH CONTROL"
FOR CRAWFORD AND BROWN AND SHARP PUSH TYPE COLLETS
AVAILABLE IN B42 AND B60 SIZE COLLETS
THE LENGTH DOES NOT VARY IF WORKPART I.D. SIZE VARIES!
NO SPECIAL ADAPTERS AND FIXTURES!