TOLL FREE 888-869-2424 (U. S. A. ONLY)
OUTSIDE U. S. A. (281) 664-1020
Production Bench Vise...Air
SPEEDS PRODUCTION in foundry
cleaning rooms, assembly lines, or
welding operations. May be used in
bending and straightening jobs.
Use in pairs with single control for
holding long workpieces.
The vise is adjusted to the desired
opening in the same manner as an
ordinary bench vise. Double-acting,
piston type air cylinder provides 1"
travel and holding power 33 times
air line pressure. (Example: 3300 lb.
at 100 psi.) Maximum operating
pressure 120 psi.
View Bench Vise
4-1/2" Jaw Width opens to 6 inches. A
locking lever controls rotation of vise on swivel
base. Hardened and ground bars maintain
accurate jaw alignment. Serrated, hardened jaw
faces are replaceable.
Vise operates with No. 45-12CI Four-Way Foot
Treadle Valve or No. 45-18 Three-Way Hand
Valve and three No. 34-14 Air Hoses. Foot
Treadle leaves operator's hands free; vise jaws
remain open or closed without constant foot
PRICES AND WEIGHTS:
14 (Complete with No. 45-12CI
Foot Treadle Valve and three No.
14-A (Vise only)
HEINRICH VISE INDEX