TOLL FREE  888-869-2424 (U. S. A. ONLY)
OUTSIDE U. S. A. (281) 664-1020

HEINRICH VISES

GRIP-MASTER VISES

AIR VISES, COLLET FIXTURES, AND CLAMPS

AIR VISE AND CLAMP ACCESSORIES
SINGLE ACTING DOUBLE ACTING
SELF-CENTERING VISES
CROSS HOLE DRILL JIGS
HAND OPERATED AIR OPERATED
 
Designed for precision cross-hole drilling of round or hexagon
stock. Clamping plate quickly adjusts to the size of the workpiece.
An easy press on the locking lever of the hand-operated
units, or actuating the air valve of the air-operated jigs, pulls the
clamping plate down against the workpiece, with a travel of 3/64". Flick the lever to vertical position, or release the foot or hand valve,
and the part can be removed. An adjustable stop, with 9" long rod for locating work longitudinally, is furnished for use on either side of the jig.
 
Drills are guided by A.S.A. slip fit, "SF", bushings fitted into adapter liners in the clamping plate. Bushings are held in position
by an adjustable lock screw. Plate is held in alignment and positioned by hardened and ground guide pins and locking plunger. The adapter liner in the clamping plate is accurately centered,
within a tolerance of .001", above the hardened and ground 60 V-Block.

HOME