TOLL FREE  888-869-2424 (U. S. A. ONLY)
OUTSIDE U. S. A. (281) 664-1020

KURT VISES


PT SERIES VISES

The original Kurt Anglock D-Series vises are designed for precision part clamping on basic machine tools such as knee-type mills, grinders and machining centers. D-Series vises are ideal for use in running production parts where datums, flatness and parallelism is important. You can precision bore, tap, drill, grind and finish with high accuracy on most parts made of die cast aluminum, steel, and iron in your Kurt Anglock vises. No other brand can give you the time proven accuracy of the Kurt Anglock vises.

All Kurt vises have a friction reducing, needle bearing, thrust collar. The needle bearing increases jaw clamping pressure.

Features:
  • "Pull-type" clamping means high precision and repeatability.
  • Up to 20,000 lbs. precision clamping force.
  • Can be mounted upright or on either side.
  • CNC style allows compact spacing.
  • Both sides ground square to within 0.001" with base and top.
  • 80,000-PSI ductile iron body.
  • Hydraulic option is available as a complete package including the intensifier (specify foot or hand actuation). Each vise must have it’s own intensifier.
  • Matching of bed height ±0.001" available at an additional cost.
  • Matching of the keyway to the stationary jaw ±0.001" is available at an additional cost.
 
VISE CLAMPING FORCE-LBS.
Manual Torque
Ft.-Lbs.		 Manual
PT400A PT800A
10 1453 -
20 2740 1637
30 4090 -
40 5257 3447
50 6297 -
60 - 3895
80 - 4764
100 - 6065
120 - 8023
140 - 8947
160 - 10337
VISE CLAMPING FORCE-LBS.
Hydraulic PSI Hydraulic
PTH400A PTH800A
1400 2380 -
1800 3100 -
2200 3820  
2800 4880 -
2900 - 9100
3000 5240 -
3400 6100 -
3500 - 11560
4400 - 14620
5300 - 17560
6200 - 20120



DIMENSIONAL DATA
  Manual Hydraulic
  PT400A PT800A PTH400A PTH800A
A 2.375 3.500 2.375 3.500
B 4.093 8.156 4.093 8.156
C 11.438 19.875 11.438 19.875
D 2.750 4.500 2.750 4.500
E 0.500 0.816 0.500 0.816
F 1.115 1.985 1.115 1.985
G 2.188 3.500 2.188 3.500
H 1.235 2.200 1.235 2.200
J 0.547 1.075 0.547 1.075
K 4.000 6.690 4.000 6.690
L 1.410 2.062 1.410 2.062
M 2.060 3.120 2.060 3.120
N 9/16 7/8 9/16 7/8
O 0.687 1.220 0.687 1.220
P 2.500 4.750 2.500 4.750
Q 3/8-16 5/8-11 3/8-16 5/8-11
R 0.500 0.700 0.500 0.700
S 0.530 0.530 0.530 0.530
T 0.250 0.250 0.250 0.250
U - - 0.750 0.875
V 4 7-3/8 4 7-3/8
W 6-3/4 12 6-3/4 12
X 8-9/16 15-3/16 8-9/16 15-3/16
Y 11-5/16 19-13/16 11-5/16 19-13/16
Ship Wt. Lbs. 32 159 46 180
Hydraulic Displacement cu. In. - - 0.55 0.98
Hydraulic Intensifier
This power source simply converts air pressure to useable hydraulic pressure. A compressed air source is needed along with a filter, regulator and lubricator unit (not included) to control clamping forces. Each vise must have it's own intensifier. Intensifier must be mounted same level or above the vise.
 

APD50-112-Hand or APD50-112-Foot

APD60-112-Hand or APD60-112-Foot
APD50.TIF
APD50-112
Air PSI Hydraulic PSI
30 1200
40 1600
50 2000
60 2400
70 2800
80 3200
Do not exceed
80 PSI Air
APD60.TIF
APD60-112
Air PSI Hydraulic PSI
30 2900
40 3500
50 4400
60 5300
70 6200
Do no exceed
70 PSI Air

Features:

Features:
  • Air oil pressure ratio 40:1.
  • 2.40 cubic inches usable hydraulic oil.
  • 1/4 NPT outlet fitting.
  • Liquid fill hydraulic sight tube.
  • For use with 4", 6" and 8XL series vises.
  • Hand or foot operated.
  • Air oil pressure ratio 92:1.
  • 2.072 cubic inches usable hydraulic oil.
  • 1/4 NPT outlet fitting.
  • Used with PTH800A vise only.
  • Hand or foot operated.
 
 

KURT VISE CHOICE INDEX
HOME