The DLH430 and DLH800 hydraulic DoubleLock vises from Kurt offer two clamping stations with a part capacity of 3" x 4" (DLH430) and 6" x 8" (DLH800). The hydraulic DoubleLock vise provides repeatable clamping for high accuracy machining and handles a higher horsepower cut than the manual version. The compact design features a wide range of clamping forces up to 12,600 lbs. 1/4" stroke - 1/8" per side.
- Productivity multiple part workholding for better spindle utilization, reduced tool change time, and reduced machine travel from part to part.
- Durability 80,000-PSI ductile iron body and steel components provide strength, rigidity and long term accuracy while absorbing machining vibration.
|
|
|
|
|
|
|
Features: |
- Large Capacity
-DL430 4" wide x 3" opening each
station.
-DL800 8" wide x 6" opening each
station.
- Productivity multiple part
workholding for better spindle
utilization, reduced tool change
time, and reduced machine travel
from part to part.
- Accuracy repeatable
clamping to 0.0002".
- Durability 80,000-PSI
ductile iron body and steel
components provide strength,
rigidity and long term accuracy
while absorbing machining
vibration.
|
- Self-adjusting holding block
over the entire clamping range.
- Metric version available.
- Optional internal hex screw
available.
- Pre-load is adjustable from
0.010 to 0.150".
- New Holding back features
the ability to clamp dissimilar
sized parts and provides
preloading ability in the front
or back jaw.
|
|
Intensifier, APD50-112, available in
either hand (APD50-112-Hand) or foot
(APD50-112-Foot) option. Purchase
separately for the DLH430 model
only. Each vise must have its own
intensifier. Consult factory for the
DLH800 model
|
|
|
|
|
