TOLL FREE 888-869-2424 (U. S. A. ONLY)
OUTSIDE U. S. A. (281) 664-1020
TOLL FREE 888-869-2424 (U. S. A. ONLY)
OUTSIDE U. S. A. (281) 664-1020
KURT VISES
SERALOCK PALLET SYSTEMS
|
SeraLock® Tower System |
|
|
Start with this Tower |
Add combinations of WedgeLock™ Components |
 |
 |
| WedgeLock™ Components | ||||
 |
 |
 |
 |
 |
|
Single Clamp Contains stationary jaw on one side and movable jaw on back side. Primarily used for vertical surfaces. Provides 5000 lbs. clamping force at 70 ft. lbs. torque. |
Double Clamp Contains two movable jaws. Used with stationary block to become a high density workholding solution. Clamp two parts with one screw. Provides 5000 lbs. clamping force at 70 ft. lbs. torque. |
Stationary Block Used with single or double clamp. |
Stationary Block (double) Use when double clamps are used side by side. |
Dividing Jaw Use in between movable and stationary jaw when milling several identical parts. Jaw floats to accommodate slight part difference. Allows several parts to be clamped with one |
|
WedgeLock™ Clamping Options |
|
Single Clamp with Stationary Jaw 1.25 Wide Body |
SWSC1
|
Double Clamp 1.25 Wide Body  |
SWDC1
|
Stationary Block 1.25 Wide Body  |
SWSB1
|
Double Stationary Block  |
SWDSB1
|
Divider Jaw |
SWDJ1
|
