TOLL FREE  888-869-2424 (U. S. A. ONLY)
OUTSIDE U. S. A. (281) 664-1020

KURT VISES

TOOLBLOX®  2 AND 4 FACE MODULAR

ToolBlox™ - 2 and 4 Face Modular Tombstones, Sub-Plates

2 and 4 Face Modular ToolBlox™ and Sub-Plates

 

New!2 Face Modular ToolBlox™

Here’s a new lighter weight building block module to add high density and versatility to most model horizontal machining centers. It is over 30% lighter than comparable size tombstones with aluminum sub-plates. Provides a lower cost alternative to dedicated fixtures. Features bolt holes and dowel pattern on each face for fast installation and removal of sub-plates and other workholding components. Built out of Steel.

 

  2-Sided Tombstone Cage Dimensional Data 4-Sided Tombstone Cage Dimensional Data
  TC2F40616 TC2F50820 TC4F40808 TC4F51010
A 400mm 500mm 400mm 500mm
B 1.250 1.250 1.250 1.250
C 1.970 2.360 1.970 2.360
D 25.000 28.000 25.000 28.000
E 24.625 27.625 24.625 27.625
F 6.000 8.000 8.000 10.000
G 0.875 0.875 0.875 0.875
H 2.000 2.000 2.000 2.000
J 3.375 3.375 3.375 3.375
K 9.125 10.500 9.500 10.625
L 1.750 2.000 1.000 1.750
M 0.875 1.000 2.500 3.375
N 5.500 7.125 5.000 6.750
O 0.750 0.750 0.750 0.750
P 6.299 7.874 6.299 7.874
Q 12.598 15.748 12.598 15.748
R 5/8 5/8 5/8 5/8
S 0.709 0.709 0.709 0.709
T 2.165 2.165 2.165 2.165
U 4.330 4.330 4.330 4.330
V 2.953 2.953 2.953 2.953
W 5.906 5.906 5.906 5.906
X 5/8-11NC
X 1" DP
5/8-11NC
X 1" DP
5/8-11NC
x 1" DP
5/8-11NC
x 1" DP
Y 0.984 0.984 0.984 0.984
AA 7.500 9.4375 3.625 4.625
BB 15.00 18.875 7.250 9.250
CC 4.625 4.625 5.125 5.125
DD 1.000 1.000 1.000 1.000
EE 4.125 4.625 4.125 4.625
FF 8.250 9.250 8.250 9.250
GG 6.250 7.250 1.500 1.500
HH 11.250 12.750 4.125 4.625
JJ 3/8-16NC
x 0.88 DP
3/8-16NC
x 0.88 DP
8.250 9.250
KK 0.375Ø
X 0.75 DP
0.375Ø
X 0.75 DP
5.750 6.750
LL - - 11.250 12.750
MM - - 3/8-16NC
x 0.88 DP
3/8-16NC
x 0.88 DP
NN - - 0.375Ø
x 0.75 DP
0.375Ø
x 0.75 DP
Wt. Lbs.
Wt. Kgs.
326
148
546
248
245
112
361
164


New!4 Face Modular ToolBlox™

This 4 sided tombstone is another lower cost option over dedicated fixtures. It is over 30% lighter than comparable size tombstones with aluminum sub-plates and is designed to reduce setup time. Provides versatility for mounting manual and hydraulic vises and most clamping devices. Standard and custom sub-plates are also available. Built out of Steel.

 


 

Sub-Plates

  • Kurt offers a variety of standard ToolBlox sub-plates for your application
  • Please specify A36 HRS or 6061 T6 Aluminum
  • You may specify optional hole patterns and/or keyways
  • All Kurt ToolBlox sub-plates are rotary ground to ±0.001” thick
  • All Kurt ToolBlox sub-plates are doweled and bolted to the Kurt Modular ToolBlox allowing the quickest change possible for dedicated fixtures
  • You can permanently mount Kurt vises to the ToolBlox sub-plates for fast, easy set-up changes on milling machines

MODEL TC2F40616 TC2F50820 TC4F0808 TC4F51010
X 15.700 19.600 8.000 10.000
X 23.700 26.700 23.700 26.700
Z 0.940 0.940 0.940 0.094

VISE JAWS

HOME